Versatile Wire Stripper Tool Item NO.: 1784510

Wire Stripping Made Easy And Convenient!

Universal Versatile Handheld Quick Wire Stripper is a practical tool that can help you strip wires quickly, efficiently, and safely. It's equipped with a sharp and adjustable blade, allowing it to process a wide variety of wires without a hitch!

How to Hold

 Hold the tool with your dominate hand.
 Position the machine between your thumb and pointer finger.
 Squeeze the stripper and let the blade tip enter the hole.

Set Cutting Depth

 Adjust the blade depth to an estimated level based on the wire you . are stripping by turning the adjustment screw.
 When adjusted properly there should be minimal pulling force and the blades should glide across the insulation.
 For difficult wires the blade angle can be adjusted by slightly loosening the screw holding the blade, repositioning the blade, and tightening.

Wire Stripping

 Choose a hole on the wheel slightly larger than the wire.
 Set the blade tip to the correct height.
 Insert the wire about one inch past the wheel from the back of the machine.
 Pull the wire through the front of the machine, keep pulling until the entire wire has passed the wheel.
 Find the slit and pull the copper out of the insulation. 

Specifications

 Good for most wires from 24 AWG (3/64") and up, either solid or stranded.
 Great wire stripper for on-the-go users looking to strip small sections of scrap wire.
 This machine may not be able to strip wires thicker than 10 AWG, especially with tougher insulation.
 Product Size: 3-1/2" x 1-3/4" x 2"